Uniden DSS 2475 - Manual (Page 65)

[ 59 ]
Intercom
From handset to handset or to the base
1) Press in the standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press
/ ▲ or ▼ , then
press the OK soft key.
If you select “All”, all handsets will be paged. An
intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press ,
, or the ANSWER soft key (or or (talk) on the
base). Or press any number key, , or (when Anykey Answer is On), or
pick up the handset from the cradle (when AutoTalk is On).
4) To hang up the intercom call, press or the END soft key on either handset (or
press on the base).
From the base to a handset
1) Press on the base in the standby mode.
2) Select the handset you want to talk with by pressing the number key (1-4).
To page all the handsets press .
3) Follow the steps 3-4 under “From handset to handset or to the base”.
T o i n t e r c o m
H a n d s e t # 2
H a n d s e t # 3
BACK BACK OK
INTERCOM/CALL TRANSFER FEATURE
Intercom and Call Transfer features are available for your phone.
• If the party is busy or out of range, you will hear a beep and the handset returns to the
standby mode.
• If any of the following occurs, the operation will be canceled.
- Press or on the handset, and (talk) on the base.
- Receive an outside/intercom call or page (while selecting the other handset).
• When the party does not answer within 1 minute, Intercom or Call Transfer is canceled.
UP308BH (DSS2465) ENG OM 12/28/04 8:27 AM Page 59