Uniden WDSS 5315 - Manual (Page 18)

7
Connecting to the Phone Line
Once the battery pack is fully charged, connect
the telephone cord to the TEL LINE jack and to a
telephone jack.
Testing the Connection
Try making a call. If your call does not connect or you cannot get a dial tone, try the following steps:
Make sure the AC adapter cord is securely connected to the DC IN 9V jack and a standard power outlet.
Check to make sure the battery is fully charged. (If you don’t see the “battery full” icon, check to make sure the
battery is properly connected).
)
2)
To telephone
outlet
To TEL LINE
Telephone cord
(supplied)
To telephone
outlet
To TEL LINE
Telephone cord
(supplied)
High Speed Internet
If your phone line has High Speed Internet please ensure you are
using and approved line filter before connecting the telephone cord.