Uniden WDSS 5315 - Manual (Page 15)

4
Direct Wall Mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the
following:
Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when
inserting screws into the wall.
Try to mount your phone within .5m of a working phone jack to avoid excessive wire lengths.
Make sure the wall material is capable of supporting the weight of the base and handset.
Use #0 screws with a minimum length of 35mm, with anchoring devices suitable for the wall material where the
base unit will be placed.
Insert two mounting screws into the wall, using the appropriate anchoring device,
00mm apart. Allow about 3mm between the wall and screw heads for mounting
the phone.
Refer to the steps on page 3 to complete the mounting process.
•
•
•
•
)
2)
3-15/16 in.
1/8 in.
TOP
1-3/8 in.
3-15/16 in.
1/8 in.
TOP
1-3/8 in.
3mm
100mm
35mm