Charging the handset – Uniden DECT2088 Series User Manual

Page 8

Installing the Phone

Charging the Handset

Use.only.the.Uniden.PS-0007.AC.adapter.supplied.with.your.cordless.telephone.

Place the handset in the charging

cradle with the display facing forward.

Connect the AC

adapter to the

DC IN 9V jack and

route the cord

through the molded

wiring channel.

Connect the AC adapter to a

standard 120V AC wall outlet.

DO NOT use an AC outlet

controlled by a wall switch.

What if the

charge LED doesn’t light up?

Reseat the handset; make sure the

contacts on the bottom of the handset are

lined up with the contacts in the cradle.

Check the AC adapter connection.

Make sure you are not using an outlet

that’s controlled by a wall switch.

Make sure that the

charge

LED illuminates when the

handset is seated.

Charge your handset at least 15 to 20 hours before plugging into the phone line.