Uniden DECT2088 Series - Manual (Page 37)

35 36 36
Using Caller ID, Call
W
aiting, and Redial Lists
Using Call Waiting
If.you.have.Call.Waiting.service.and.a.second.call.comes.in.when.you.are.on.the.
phone,.a.call.waiting.tone.will.sound..If.you.also.have.Caller.ID.service,.the.phone.
shows.the.Caller.ID.information.for.the.incoming.call..Press.[ /Flash].on.the.handset.
or.[Flash].on.the.base.to.accept.the.waiting.call..There.is.a.short.pause,.and.then.
you.will.hear.the.new.caller..To.return.to.the.original.caller,.press.[ /Flash].on.the.
handset.or.[Flash].on.the.base.
Note:.You.must.subscribe.to.Call.Waiting.service.for.this.feature.to.operate..Not.all.features.are.available.in.all.areas.
Redialing a Number
You can quickly redial the last five numbers dialed on each station.
With.the.phone.in.standby,.press.the.[Redial/Pause].to.open.the.redial.list.
Use.[ ].and.[ ].or.[Redial/Pause].to.scroll.through.the.redial.list.
When you find the number you want to dial, press [ /Flash].or.[
].on.the.handset.or.pick.up.the.corded.
handset.from.the.base.or.press.[ ].on.the.base.
Notes: • If the number exceeds 32 digits, only the first 32 digits are retained in redial memory.
.
•.If.the.redial.memory.is.empty,.EMPTY.appears.in.the.display.and.you.will.hear.a.beep.
. •.You.can.also.press.[ /Flash].or.[ ].on.the.handset.or.pick.up.the.corded.handset.from.the.base.or.press..
[ ].on.the.base.before.you.open.the.redial.list..Find.the.phone.number.you.want.to.dial,.and.then.press.
[Menu/Select].
Deleting a Redial Record
If.you.want.to.delete.a.phone.number.from.the.redial.list,.follow.the.steps.below:
With.the.phone.in.standby,.press.[Redial/Pause].
Use.[ ].and.[ ].to.scroll.through.the.redial.list.
When you find the redial number you want to delete, press [Menu/Select].and.select.DELETE.ENTRY.
When the phone asks you to confirm, select YES. The redial number is deleted.
)
2)
3)
)
2)
3)
4)
UC517BH(DECT2088) book OM 2.indb36 36 1/9/2008 11:07:55 AM