Uniden DECT2088 Series - Manual (Page 49)

48
Using the
Answering
System
Using the Answering System
Turning Your Answering System On and Off
From the base From the handset
Turning.On
With.the.phone.in.standby,.press..
[Answer on/off].
The.system.announces.“Answering.System.
is.on”.and.plays.the.current.greeting.
ANSWER.ON.appears.on.the.base.display.
)
2)
3)
Press.[Menu/Select]..
Select.the.ANSW..SETUP.menu,.and.then.
the.ANSWER.SETUP.submenu.
Move.the.cursor.to.select.ON.
Press.[Menu/Select]..You.will.hear.a.
confirmation tone.
)
2)
3)
4)
Turning.Off
With.the.phone.in.standby,.press..
[Answer on/off].
The.phone.announces.“Answering.System.
is.off.”
ANSWER.OFF.appears.on.the.base.display.
)
2)
3)
Press.[Menu/Select]..
Select.the.ANSW..SETUP.menu,.and.then.
the.ANSWER.SETUP.submenu.
Move.the.cursor.to.select.OFF.
Press.[Menu/Select]..You.will.hear.a.
confirmation tone.
)
2)
3)
4)
Note:.. If.the.answering.system.announces.“No.remaining.time”.when.you.turn.it.on,.the.memory.is.full.(the.message.
counter.also.shows.FL)..The.answering.system.can’t.record.any.new.messages.until.you.delete.some.of.the.
saved.ones.
UC517BH(DECT2088) book OM 2.indb48 48 1/9/2008 11:08:02 AM