Uniden DCX 640 - Manual (Page 72)

[ 7 0 ] E X P A N D I N G Y O U R P H O N E w w w . u n i d e n . c o m
From the base to a handset
1) During a call, press intercom on the base. The call will automatically be placed on hold.
2) Select the handset you want to talk with by pressing the number key (1-4). To page all
the handsets press * /tone. An intercom tone sounds. To cancel the transfer, press
intercom or (speaker) on the base.
3) On the receiving handset, press talk/flash or hold/transfer/int'com to answer the page.
Or press any number key, * /tone/ ←, or #/→ (when Any Key Answer is On), or pick up
the handset from the cradle (when AutoTalk is On). The intercom mode is activated, but
the caller is still on hold.
4) To speak to the caller, press talk/flash or speaker on the receiving handset.
Replacing the Base
If the base unit is replaced with a different base from this same series of cordless models,
you must clear the handset(s) and base identification numbers. To do this, select “System
Reset” from handsets display menu option list (see page 28 for guidance).
For model number
verification, contact
Uniden Customer
Service or visit our
website www.uniden.
com
note
EXP
A
NDING Y
OUR
PHONE