Uniden DCX 640 - Manual (Page 60)

[ 5 8 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E w w w . u n i d e n . c o m
Screening a call
From the base
To screen an incoming call, do the following steps as follows:
1) After the answering system answers, the base speaker will let
you hear the calls as the machine records the message. To
adjust the volume, press ring/volume/
∧ or ring/volume/∨.
To mute the call screen temporarily, press play/stop when the
system is answering.
2) To answer the call, press (speaker) or pick up the handset
from the base (when AutoTalk is set to On). If the handset is
away from the base, press talk/flash, speaker or any number
key,
* /tone/ ←, or #/→ (when Any Key Answer is set to On).
The answering system will disconnect automatically.
From the handset
1) Press select/
when the system is answering.
To mute the call screen temporarily, press end when the system is answering.
2) To answer the call, press talk/flash, otherwise press end to cancel the call screen and the
system return to standby mode.
•If you press talk/
flash, call screen will
be canceled and the
handset is put in
talk mode.
•If you press select/
while another
handset is screening a
call, you will hear a
beep and you can not
screen a call.
note
THE
INTE
GRA
T
ED
ANSWERI
NG DEVI
CE