Uniden TRAX430 - Manual (Page 49)

Page 49
What Else Can I Do with Routes?
Tap the set as
waypoint
button. The
device goes to
the Waypoint
screen, which
shows the
waypoint along
with your
destination.
If you want to add more waypoints, go back to the main Menu
screen and enter the next destination. (When you leave the
Waypoint screen, the device saves your waypoints until you
delete the route.)
When you are finished adding waypoints, tap the
recalculate button.
The device re-plots the route, starting from your current
location and going to the waypoint. Then it plots the route
from the waypoint to the final destination.
Until you tap the recalculate button, the device will use
the route as originally plotted, without any waypoints.
6)
7)
8)