Uniden DCT 748 User Manual

Page 9

G E T T I N G S T A R T E D [ 8 ]

w w w . u n i d e n . c o m

B. Install the rechargeable battery pack into the handset

The handset is powered by a rechargeable battery pack. The battery recharges
automatically when the handset is placed in the base unit.

1) Press down on the handset battery case cover (use the

finger indention for a better grip) and slide the cover
downward to remove.

2) Plug the battery connector (red & black wires) into the

jack inside the battery compartment. (The connector
notches fit into the grooves of the jack only one way).
Match the wire colors to the polarity label in the
battery compartment, connect the battery and listen for
a click to insure connection.

3) Make sure you have a good connection by gently pulling

on the battery wires. If the connection is secure, the
battery jack will remain in place.

4) Place the battery case cover back on the handset and

slide it upwards until it clicks into place.

•Use only the Uniden

(BT-446) rechargeable
battery pack supplied
with your cordless
telephone.

•Replacement battery

packs are also available
through the Uniden
Parts Department at
(800) 554-3988,
Monday thru Friday from
8:00 a.m. to 5:00 p.m.
or online at
www.uniden.com

note

TTI

NG S

TED

UP720.book Page 8 Tuesday, July 6, 2004 10:55 AM