Uniden DCT 748 - Manual (Page 27)

B A S I C S [ 2 6 ] w w w . u n i d e n . c o m
Using Your Phone
Making and Receiving Calls
Making a call
From the handset
1) Remove the handset from the charging cradle.
2) Press talk/flash.
3) Listen for the dial tone.
4) Dial the number.
OR
1) Remove the handset from the charging cradle.
2) Dial the number.
If pause is required in the dialing sequence, press pause/redial.
P appears in the
display, which represents a 2-second pause.
3) Press talk/flash.
From the Handset Speakerphone
1) Remove the handset from the charging cradle.
2) Press .
3) Listen for the dial tone.
4) Dial the number.
5) When the other party answers, talk into the microphone.
•If the line is already in
use, the base and all
registered handsets
that are not currently
in use will display
"
L i ne I n U s e ."
•The handset
microphone is located
at the bottom of the
handset.
•For best performance,
use the speaker phone
in a quiet room and let
the caller finish
speaking before you
speak. If you or the
other party has
difficulty hearing,
adjust the speaker
volume.
note
BA
SI
C
S
UP720.book Page 26 Tuesday, July 6, 2004 10:55 AM