Uniden 1380 - Manual (Page 34)

3
Leaving a Memo
Use the MEMO button to record a specific message for others who have access
to the unit.
1. Press and hold the
MEMO button. The unit announces, “Record your memo
after the tone.”
2. Record your message after the beep.
3. Release
MEMO when you’re finished talking. The unit treats the memo as a
message, as the display shows.
Memory Full
When the unit’s memory is full, it answers after 10 rings and announces,
“Memory is full.” A 20-second waiting period follows, allowing you to enter your
security code.
Remote Access
You can access your answerer from any touch-tone phone from another location
by entering your 3-digit security code (the default security code is 1 2 3, but you
can change it.) Be aware that remote functions do not work with rotary or push-
button pulse-dialing phones.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security
code. The unit confirms your code with a beep. To bypass the greeting, you
can enter your 3-digit security code any time while the greeting is playing.
The unit waits for a remote command for 20 seconds after the correct security
code has been entered. Menu selections can be made while the menu is playing.
Note: The unit answers on the 10th ring when it is turned off or the
memory is full. To access the answerer, enter the 3-digit security
code after the beep. If memory is full, play messages and erase
some of them to restore memory.