Important instructions for moving the – Uniden 1380 User Manual

Page 10

Your speakerphone can also be mounted on a wall plate (not included).

Note: To prevent the handset from falling out of the cradle while the

phone is hanging on the wall, you must switch both the handset

hook and the desk stand to their wall-mount positions.

1. On the front of the base, pull the handset hook out of the slot. Rotate hook

180 degrees and flip it from front to back. Slide it

back into the slot.

2. Turn the base over. Press in on the tabs and

remove the desk stand from the back of the base.

3. Rotate the stand 180 degrees, and insert

the hooks marked WALL into the notches

marked WALL. Press in on the tabs and

snap the stand into place.

4. Connect the telephone line cord to the

wall jack and the phone. If desired, wrap

any excess cord around the cord hooks as

shown.

5. Place the mounting slots over the pins on

the wall plate, and slide

the base down to lock

it into place.

Important

Instructions

for Moving the