Uniden 1380 - Manual (Page 18)

18
Setting Your Local Area Code
1. Press and release the MENU button until the screen displays LOCAL AREA
CODE.
2. The left-most digit, or a (_) sign flashes indicating the unit is ready to accept
the area code entry.
3. Press the keypad number to set the 3-digit local area code in one step.
4. After the 3rd and last digit are entered, press the
MENU button to store the
area code and go to the next setting.
Note: If you make a mistake, you can use SKIP or REPEAT to move
between 1st to 3rd digit and input the number from the keypad again.
Note: To skip to the next setting, press MENU. To exit setup, press EXIT.
Setting the Dialing Mode
This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode
dialing. The phone is automatically set for touch-tone use.
1. Press and release the
MENU button until the screen displays 4 TONE PULSE.
“ 4 ” indicates which set up the unit is currently in.
2. Use SKIP or REPEAT for the desired setting.
3. When finished, press MENU to confirm.
Note: To skip to the next setting, press MENU. To exit setup, press EXIT.
Setting Day of Week
This setting allows you to set day of week .
1. Press and release the
MENU button until the screen displays SET DAY.
2. Use SKIP and REPEAT for the desired setting .
3. Press MENU to confirm and go to the next setting.