Uniden 1380 - Manual (Page 33)

33
Playing Messages
Use the PLAY/STOP button to play messages. The unit first plays new messages
in the order received. If there are no messages, the unit announces, “You have
no messages.” If there are no new messages, the old messages are played
back.
When playing messages, the message number and the date-time stamp will be
shown on the display.
• To play messages, press and release
PLAY/STOP.
• To stop playback, press and release PLAY/STOP again.
• To restart the message that is playing, press the REPEAT button once.
• To replay the previous message, press the REPEAT button twice.
• To play the SKIP message, press and release SKIP.
While playing message, user can press MESSAGE SPEED button to listen to
message playback at a lower speed.
Each press of the
MESSAGE SPEED button change message playback speed.
The screen displays current message speed.
Erase Messages
Single Messages
You can erase a message itself, leaving the Caller ID information.
• While the message is playing, press and release
DELETE. The unit erases the
current message and announces, “Message erased.”
All Messages
You can also erase all the old messages only, leaving the new messages and
Caller ID information.
While the unit is in ready-to-answer mode, press and hold
DELETE until the unit
announces, “Messages erased.”
• New messages can not be erased in this way. To erase new messages, play
them then press DELETE during play back.