Uniden D2280 - Manual (Page 17)

English - 1
Shift Keying (FSK) notification. Contact your voice mail provider for
information.
When you have new messages, the display shows a message icon. To
listen to your new (and old) messages, press MEssagE/MuTE and select
Voice Mail .
When you select Voice Mail , you will be prompted to enter a
Voice Mail Access number if you have not yet set one up (see
p. 8). If you have already set one up, your phone will dial it.
After you listen to your messages, the message icon turns off. If it
doesn’t, you can reset it: With the phone in standby, open the menu
and select Global Setup ; select VMWI Reset , then select Yes .
USING THE ANSWERING SYSTEM
Answering System Options ( Ans. Setup )
You can set or change the answering system options from any handset.
Just open the menu and select Ans. Setup .
Select this option... To...
Security Code
Enter a 2-digit PIN so you can access your
answering system from any touch-tone phone (see
p. 21).
Ring Time
Set the number of rings ( 2 , 4 , or 6 ) before the system
answers. Toll Saver makes the system answer after
2 rings if you have new messages or after 4 rings if
you don't.
Record Time
Set the amount of time ( 1 or 4 minutes) callers
have to leave a message. Choose Announce Only if
you don't want the system to let callers to leave a
message.
Message Alert
Have the system beep every 15 seconds when you
have a new message. The alert stops after you listen
to all your new messages or if you press any key on
the base.
Ans. Language
Change the language of the system's voice
prompts.
