Uniden D2280 - Manual (Page 13)

English - 1
Adding Phonebook Entries
With the phone in standby, open the phonebook. Press MEnu/sElEcT and
select Create New. Enter a name & number and select a personal ring.
Enter the phone number (up to 20 digits) exactly as you would dial
it.
If you need the phone to wait before sending the next set of digits,
press REdial/PausE to insert a 2-second pause. You can insert multiple
pauses, but each one counts as a digit (you’ll see P in the display).
To edit the name, press PHOnEbOOk to move the cursor back and
insert a letter. Press inTERcOM/clEaR to delete a letter.
To edit the number, press inTERcOM/clEaR to back up the cursor and
delete numbers. Re-enter the correct numbers.
Deleting All the Phonebook Entries
With the phone in standby, open the phonebook. Press MEnu/sElEcT and
select Delete All . When the phone prompts you to confirm, select Yes .
USING SPECIAL FEATURES
Silent Mode
You can silence the ringers on the base and all handsets for a specific
period of time; the answering system answers any incoming calls
without playing anything through the speaker.
With the phone in standby, press and hold # on any handset. The
phone prompts you to select the number of hours ( 1 - 9 or Always
On ) that you want it to stay in silent mode.
To confirm, press MEnu/sElEcT or just wait about 5 seconds. The
phone turns on the answering system and displays Silent Mode On
on each handset.
After the selected number of hours, the phone automatically exits
silent mode. To exit silent mode manually, press and hold # again.
If the phone is in silent mode and you turn off the answering
system, the phone exits silent mode.
♦
♦
♦
♦
1.
2.
3.
