beautypg.com

Uniden DCT758 User Manual

Page 57

background image

56

To.operate.from.a.remote.location,.use.any.touch-tone.telephone,.and.follow.these.steps:

Call.your.telephone.number.and.wait.for.the.system.to.answer..If.the.answering.system.is.off,.it.will.answer.

after.about.0.rings.and.sounds.a.series.of.beeps.
During.the.greeting.or.the.beeps.(if.answering.system.is.off),.press.

[0].and.enter.your.security.code/PIN.

within.two.seconds.(see.

Setting a Security Code or Personal Identification Number (PIN).on.page.5).

The.answering.system.announces.the.current.time.and.the.number.of.messages.stored.in.memory..You.hear.

“To.play.incoming.messages,.press.zero-two..For.help,.press.one-zero”.followed.by.a.beep.
Enter a remote command from the chart below. You have 15 seconds to enter the first command; after the

first command, you have two seconds to enter each command.

Command

Function

Command

Function

[0].and.[1]

Repeat.a.message*

[0].and.[6]

Answering.system.on

[0].and.[2]

Play.incoming.messages

[0].and.[7]

Memo.record.start/stop

[0].and.[3]

Skip.a.message

[0].and.[8]

Greeting.message.record.start/stop.

[0].and [4]

Delete.a.message

[0].and.[9]

Answering.system.off

[0].and [5]

Stop.operation

[1].and.[0]

Help

*. If.you.press.

[0].then.[1] in the first four seconds of a message, the system skips to the previous message..

If.you.press.

[0].then.[1] after the first four seconds of a message, the system repeats the current

message.

When you finish, you will hear intermittent beeps indicating that the system is in the command waiting mode.

Enter.another.command.from.the.chart.within.two.seconds.
Hang.up.to.exit.the.system..The.answering.system.automatically.returns.to.its.normal.standby.setting.

.

2.

3.

4.

5.

6.