Finding a lost handset, Using hold, conference and transfer, Using the clarity boost feature – Uniden DCT758 User Manual

Page 37: Placing a call on hold

Using the Clarity Boost Feature

If.you.encounter.interference.while.using.your.phone,.you.can.manually.improve.the.sound.by.setting.the.clarity.

booster.to.on..This.works.only.when.the.phone.is.in.use,.so.while.you.are.on.a.call:

Press.

[menu/clear].

Move.the.cursor.to.CLARITY.BOOST,.and.then.press.

[select/ ]..BOOST.ON.and.B.appear.in.the.display.

Use.the.same.procedure.to.turn.off.clarity.booster..BOOST.OFF.appears.

Finding a Lost Handset

To.locate.a.misplaced.handset,.press

[find hs].on.the.base.(or.[mute/find hs] on.the.dual-keypad.base).when.the.

phone.is.in.standby..All.registered.handsets.will.beep.for.60.seconds,.and.PAGING.appears.on.the.handset.display..

To.cancel.paging,.press.

[find hs].([mute/find hs]).again.or.any.key.on.the.found.handset.

Using Hold, Conference and Transfer

Placing a Call on Hold

To.place.a.caller.on.hold,.press.

[xfer/intercom].on.the.handset,.[hold].on.the.base,.or.[hold/int’com/xfer] on.the.

dual-keypad.base..If.you.leave.a.caller.on.hold.for.more.than.ten.seconds,.the.display.will.read,.LINE.ON.HOLD.in.

the.handset.display.
To.return.to.the.party.on.hold,.press.

[ /flash].or.[ ].on.a.handset.or.[speaker].on.the.base.

Note: You can only place a caller on hold for 5 minutes. Once 5 minutes have passed, the caller will

be disconnected and the phone will return to standby.

While a call is on hold, Caller ID and Call Waiting can not be received.

.
2.