Uniden BEARCAT UBC3500XLT - Manual (Page 86)

86
Appendix
Initial Setting of the Menus.
Parameter Initial
Band Plan(Factory Default Setting)
*Band Plan Number does not be initialzed by turning the scanner on
by pressing and hoding [2] key + [9] key + [Hold] key. 1
Program System Edit Name (This is named
automatically.)
Edit Sys Option Set Quick Key . (dot)
Set Lockout Unlocked
Set Hold Time 2
Set Delay Time 2 sec
Set Data Skip Off
Edit Group Edit Name (This is named
automatically.)
Set Quick Key . (dot)
Edit Channel Edit Name (This is named
automatically.)
Set Priority Off
Set Alert Off
Set CTCSS/DCS Off
Set Modulation Auto
Set Attenuator Off
Set Lockout Unlocked
Set Lockout Unlocked
Srch/CloCall Opt Freq Lockouts Unlock All (Not Stored.)
Rvw Search L/O (Not Stored.)
Broadcast Screen Set Each
Band Band 1 Off
Band 2 Off
: :
Band 10 Off
Program
Band Select Band 1 - 10 0.0000 0.0000
(MHz)
(All Band)
Set Lower Limit
Set Upper Limit
CTCSS/DCS Search Off
Max Auto Store 100
Set Delay Time 2 sec
Set Modulation Auto
Set Attenuator Off
Set Data Skip Off
Set Step Auto
Air Band Step 12.5 kHz
Appendix