Uniden BEARCAT UBC3500XLT User Manual

Page 64

Search for ...

Search and Store

Select the system where you want to store the

frequencies

Select the range from Custom Search or Air

Notes:

• If no system is programmed, No System

Stored appears.

• Over Limit appears when you select the

system which has already stored 20 channel
groups, or when the total channels has been
already 2500.

• If all the frequencies of the selected search range

is locked out, All Locked! appears.

When you select a search range, the scanner looks for
active frequencies within that range and SEARCH AND
STORE appears on the display’s lower line and the

system name and search range name appear on the
display’s upper line. When the scanner finds an active
transmission, it checks to see if the frequency has
already been stored in the system. If the frequency
has already been stored, the scanner continues to
search. If the frequency has not been stored, it stores
the frequency into a group named Found Channels,
then resumes searching. The scanner creates this
group if it doesn’t already exist.

Menu