Uniden BEARCAT UBC3500XLT - Manual (Page 47)

47
Programming/Editing Optional Settings
Hints:
• Access single-digit system Quick Keys by
pressing the single digit on the keypad during
scanning. Access two-digit system Quick Keys by
pressing then both digits.
• You can assign as many systems to the same
quick key as you want.
• To be scanned, a system’s quick key must be
activated and the system must be unlocked.
Setting System Lockout
Program System
Select the system
Edit Sys Option
Set Lockout
This setting controls whether the system is scanned
when its quick key is enabled. Rotate the scroll control
to select your setting, then press E.
Lockout - the system is not scanned
Unlocked - the system is scanned
Note: You can also lock or unlock a system by holding
and rotating the scroll control to select the
system, then pressing + L/O.
Setting the System Hold Time
Program System
Select the system
Edit Sys Option
Set Hold Time
This setting controls how many seconds the scanner
scans a system before moving to the next unlocked
system. Enter a value from 0-255, then press E to
save the setting.
Menu
Func
Func
Menu