Uniden BEARCAT UBC3500XLT - Manual (Page 63)

63
Searching and Storing
Off The attenuator is off.
On Reception is attenuated by about 25 dB.
Notes:
• Turn on this setting if you are near other strong
signal sources. Attenuation sometimes helps to
reduce interference and desensitization that
strong signals create.
• Search with Scan - sets whether the scanner
includes the service search during scanning.
If unlocked, the scanner first scans all selected
systems, then searches the air service searches
for the selected hold time (0-255 seconds).
Notes:
• You can also lock and unlock a search range by
pressing , selecting the search range then
pressing + L/O.
• If you select 0, the scanner searches the entire
range one time.
• The default setting is 2 seconds for each
search range.
• The scanner moves to the next system or
search range after the hold time expires, any
current transmission ends, and the channel
delay time expires.
Auto Search and Store
Your scanner’s Auto Store feature lets you search for
new frequencies in custom search ranges or within a
service search range and stores the frequency into a
conventional system automatically.
Selecting a System
To store frequencies which is found during Auto Store,
you must first select a system where the frequencies
will be stored.
Func
Func