Uniden BcT7 - Manual (Page 9)

Scanning the Alert Monitor Frequency Banks
The Alert Monitor works with the Highway Patrol, Police, and Department of Transportation (DOT) frequency banks.
Frequencies are preprogrammed at the factory on a state-by-state basis.
Selecting the State
Press
S
to select the state you
are operating in. Press and hold
S
to scroll rapidly.
➪
To step forward through the states
(A - W), press
S and, within two
seconds, press < repeatedly. To
step backward through the states
(W -A), press
S and, within
two seconds, press > repeatedly.
➪
To scroll rapidly, press S and
hold > or < .
➪
Selecting a Frequency Bank
Press
G
to monitor Highway
Patrol frequencies.
➪
Press P to monitor Police
frequencies.
➪
Press P again to monitor DOT
frequencies.
HIGHWAY appears in the display
and scanning begins two seconds
later.
POLICE flashes in the display and
scanning begins two seconds later.
HIGHWAY flashes, because those
frequencies are scanned, too.
DOT flashes in the display and
scanning begins two seconds later.
HIGHWAY flashes because those
frequencies are scanned, too.
HIGHWAY
9