Uniden BcT7 - Manual (Page 12)

Muting the Alert Tone
One Moment Mute Continuous Mute Canceling Mute
Press
M
during the Warning
Alert. The Alert Tone stops and
the Mute LED flashes until the
alarm cycle is finished.
➪
Press and hold M for two
seconds to turn Continuous Mute
on whenever you wish. You hear
two beeps and the Mute LED lights
continuously. No Alert Tones will
sound.
➪
To cancel Mute,
1. Press and hold M for two
seconds. You hear two
beeps and the MUTE LED
goes out.
2. Change states or frequency
banks. The Mute LED goes
out after scanning starts.
3. Turn the scanner off and on.
Note: Mute only works in the Highway, Police, and DOT frequency bands.
Warning Light Adjustment
The Warning Light has three settings: Bright, Dim, and Off.
Press SQUELCH to select Bright,
Dim or Off. The WARNING light
flashes and the alert tone beeps.
➪
If you select OFF, the FLASH icon
in the display reminds you the
Warning Light is off.
WARNING: You can turn off the
Warning Light and completely mute
the Alert Tone at the same time.
This deactivates the Warning Alert.
PUSH
FLASH
SQ
Press In
Mute LED
Flashes
MUTE
FIRE/NEWS
STATE
HOLD/RESUME
HIGHWAY
WARNING
12