Uniden BcT7 - Manual (Page 10)

When the BCT7 receives
communications, scanning stops, the
active bank type replaces the state
code
, and the frequency displays.
Active Bank indicators:
HP - Highway Patrol
PO - Police
DT - DOT
When the transmission ends, a
built-in two second delay feature
holds the scanner on that
frequency for a response. If there
is no response, scanning resumes.
Scan Hold
When scanning stops on a desired
frequency, press
H
to hold on that
frequency as long as you like.
➪
To resume scanning, press H . To scan the other frequency banks,
see “Scanning the Fire, News,
Weather, and Private Frequency
Banks,” page 14.
Note: While in the HOLD mode, the alarm circuit is inactive.
10