Uniden BcT7 - Manual (Page 18)

Search
You can use the SEARCH feature to find active frequencies in your area. Many frequencies have already have been
pre-programmed into one of the SCAN MODES (Highway, Police, DOT, etc.).
You can search for any frequencies between 29.000 and 956.000 MHz, as well as CB channels 1 through 40, as long as
they are within the 12 Bands covered by the
BCT 7 . See the table on page 5, or the Specifications at the back of this
Guide.
1. Press B to enter
Band Search Mode.
➪
2. Two seconds later, the BCT7
begins searching that band.
➪
Press < or > to change the
direction (up or down) of the
frequency search.
OR
Press B repeatedly to select
another band.
During Search, press L to
lockout undesired frequencies that
the scanner stops on.
Note: AIR appears when
searching the Aircraft Band.
18