Uniden BcT7 - Manual (Page 15)

Scan Hold
Note: Warning Alert does not work in this mode.
When scanning stops on a desired
frequency, press
H
to hold on that
frequency as long as you like.
➪
To resume scanning, press H .
➪
If the BCT7 stops on an undesired
frequency, press H twice to force
the unit to start scanning before the
end of that transmission..
Or, lock out that frequency (see
Frequency Lock Out)
Frequency Lock Out
You can lock out a frequency so it is not scanned.
Lock out does not erase the frequency.
You can restore the frequency to scanning whenever you wish.
Note: You can lock out up to 50 preprogrammed frequencies and 100 user-programmed frequencies.
In Scan Mode
When the scanner stops on a
frequency you don’t want to hear,
press
L
.
➪
Scanning resumes immediately
because that frequency is no
longer in the scanning sequence.
HIGHWAY POLICE DOT WX PRIVATE FIRE NEWS AIR
15