Uniden DECT4066-3 - Manual (Page 42)

40
Resetting and Registering Handsets
If you are having trouble with a cordless handset or if you want to
replace one, you need to clear the registration information from the
base and the handset:
Do you have the base the handset is registered to?
Yes No
1. Press and hold END and # until the
System Reset menu appears (about 5
seconds).
2. Select Deregister HS. The display
lists all registered handsets.
3. Select the handset you want to reset.
4. When the handset asks you to confirm,
select Yes. (It may ask you twice, just
to be sure.) The handset clears its
information from the base and deletes
its own link to the base.
1. Press and hold END and
# until the System Reset
menu appears (about 5
seconds).
2. Select Base Unavailable.
3. When the handset asks you
to confirm, select Yes. (It
may ask you twice, just to be
sure.) The handset deletes its
own link without contacting
the base.
When you reset a handset (or if you buy a new one), that handset
displays a Handset Not Registered message. If you see this message
on a handset, you need to register it to a base before you can use it.
Registering a handset
Does the handset fit in the base cradle?
Yes No
Place the handset
in the base. The
display should
say Handset
Registering.
1. On the base, open the menu and select Register
Handset.
2. On the handset you want to register, press
and hold # until the display says Handset
Registering (about 2 seconds).