Uniden DECT4066-3 - Manual (Page 39)

37
If… Try…
No stations will
display any Caller ID
information.
-Letting calls ring at least twice before answering.
-Seeing if the call was placed through a
switchboard.
-Checking with your telephone service provider to
make sure your Caller ID service is active.
I can't dial from the
Caller ID list.
-Making sure you entered the correct area code. If
you have to dial all 10 digits, you need to delete
the area code (see "Using Seven-Digit Dialing" on
page 24).
Caller ID displays
briefly and then
clears.
-You may have to change the line mode. Contact
customer service for more information.
I can’t transfer calls. -Resetting all the handsets (see page 40).
I can’t get two
cordless handsets to
talk to the caller.
-Making sure both handsets are registered to this
base.
-Making sure no station is in Privacy Mode (see
page 30).
The phone keeps
ringing if I answer
on an extension.
-You may have to change the line mode. Contact
customer service for more information.
I can't save a number
to an existing
phonebook entry.
-Seeing if the number is already in the phonebook.
-Seeing if that entry already has two phone
numbers.
I can’t hear the base
speaker.
-Changing the base speaker volume.
I can't register a
handset.
-Seeing if there are 10 handsets registered to this
base.
-Resetting the handset.
My alarm rings at
the wrong time.
-Making sure the time is set correctly (see page 18).
My alarm won't ring
on the right day(s).
-Making sure the days are selected (see page 32).
-Making sure the date is set correctly (see page 18).