Uniden DECT4066-3 - Manual (Page 31)

29
Using Multi-station Features
The expandable base works together with the accessory handsets
to give you some useful multi-station features. (A station can be any
cordless handset or the base.) You must have at least one accessory
handset to use the features in this section.
Expanding Your Phone
 Your base supports a total of ten accessory handsets and 2
MULTIRANGE TM chargers, including any that were supplied with
your phone. It is compatible with both the DCX400 handset with
charger and the DRX402 handset with MULTIRANGE TM charger.
 Your base might be compatible with other Uniden accessory
handsets: please visit our website for a list of compatible handsets.
 Accessory handsets must be registered to the base before you
can use them. Handsets that aren't registered display a Handset
not registered message. For instructions on registering handsets
to this base, see page 40 or refer to the manual that came with the
accessory handset.
 Any accessory handsets that came packaged with the base are
already registered to that base for you.
 If a handset was previously registered to a base, you have to reset
it so you can register it to a new base (see page 40 for DCX400 and
DRX402 handsets).
Using Multi-Station Conference Calling
 When an outside call
comes in on either line, the
base and four cordless
handsets can join in a six-
way conference call with the
outside caller.
 To join a call in progress,
just connect to the active
line (press LINE1 or LINE2 ).
CONFERENCE
CALLER IDENTIFICATION