Universal Remote Control (URS) SL-9000 - Manual (Page 37)

Cursor Control
Buttons that correspond to the UP, DOWN, LEFT, RIGHT,
SELECT, GUIDE, MENU and EXIT functions of your
audio/video equipment.
Device
Audio or video equipment, e.g. Television, VCR, Cable
box, Audio receiver, Satellite receiver, etc.
Device Button
Any of the eight buttons located at the top of the remote
control labeled AUD, CD, DVD, AUX, SAT, TV, VCR and
CBL. Device Buttons are used to select modes of operation
and to program the remote control.
Joining
Transfer of a function from the AUDIO input selects and
keypad(0-9) on the SL-9000 to a Device button at the top of
the remote control
Learning
Transfer of a function from a button of an original remote
control to a button on the SL-9000 remote control.
LCD
Liquid crystal display window located at the top of the
remote control. During normal operation the LCD
indicates the mode. The LCD also indicates the remote’s
programming status.
Memory Buttons
Buttons labeled M1, M2, M3, M4, and POWER. These but-
tons can be programmed to store Favorite Channels, Macro
Commands, or to “relocate” functions from one mode to
another.
Modes
Modes correspond to Device Button selections. Modes are
displayed in the LCD as AUDIO, CD, DVD, AUX, SAT, TV,
VCR and CABLE. Modes indicate the type of device the
remote control is currently operating.
36 36
Glossary