Universal Remote Control (URS) SL-9000 - Manual (Page 32)

Erasing Memory Buttons
1
Select the mode (AUD or SAT) in which you want to
erase the Memory Button.
2 Press the corresponding Device Button (AUD or SAT) and
MUTE button, simultaneously. SET will appear in the
LCD. Press the Memory Button to be erased. M(1-5)_# #
will appear in the LCD.
3 Press the CHANNEL UP button. SAVE will flash in the
LCD. The Memory Button is now erased.
Note: Any previously stored commands on a Memory Button
will be erased when new commands are stored on the same
Memory Button
.
31 31
Advanced Features
1 Press the Audio Device Button and the MUTE button
simultaneously. SET will appear in the LCD.
2 Press Memory Button M2. M2_ # # will appear in the LCD.
3 Press the MUTE button (to turn on the Audio receiver)
M2__01 will appear in the LCD.
Press the TV Device Button (to change to the TV mode)
M2__02 will appear in the LCD.
Press the MUTE button (to turn on the TV)
M2__03 will appear in the LCD.
Press the VCR Device Button (to change to the VCR mode)
M2__04 will appear in the LCD.
Press the MUTE button (to turn on the VCR)
M2__05 will appear in the LCD.
Press the SAT Device Button (to change to SAT mode)
M2__06 will appear in the LCD.
Press the MUTE button (to turn on the Satellite receiver)
M2__07 will appear in the LCD.
*Power On/Off is located on the MUTE button during the
programming mode.
4 Press the CHANNEL UP button. SAVE will flash in the
LCD, and the remote will return to the AUDIO mode.