Universal Remote Control (URS) SL-9000 - Manual (Page 22)

4 Press the ENTER button. SAVE will flash twice and the
LCD will return to AUDIO indicating that the joined
function has been stored.
Every time that the Device button is pressed it will also emit
the joined function.
To erase a joined function from a Device button:
1 Press the AUDIO and ENTER buttons simultaneously on
the remote control. JOIN will appear in the LCD.
2 Press the Device button that you would like to erase a
joined function. CLEAR will flash and INPUT will then
appear in the LCD.
3 Press the ENTER button. The LCD will flash SAVE twice
and return to AUDIO indicating that the join has been
erased.
Main Device Mode
When the main device is displayed in the LCD, the
SL-9000 will perform all of the preprogrammed, joined,
learned and punch through features for that device mode.
Automatic Audio Mode
The remote is defaulted to the Automatic Audio. When the
remote control is in this mode, pressing a Device button a
second time will display A_XXX in the LCD indicating that
the Volume and Mute controls of the device programmed
into the Audio mode of the SL-9000 is active, while full
function control of all other buttons of the current Device
mode is maintained.
21 21
Using Your Remote
Main Device Mode Automatic Audio Mode