Tripp Lite NETCOMMANDERTM B072-016-1 - Manual (Page 11)

11
Operation
(continued)
F7 Defaults
Changing the OSD hotkey
By pressing [Shift], [Shift] the OSD appears. You can replace [Shift], [Shift] with any of the
following:
• [Ctrl], [Ctrl]
• [Ctrl], [F11]
• [Print Screen]
To change the hotkey:
1. Navigate to the Hotkey line.
2. Press the [Space] bar to toggle between options. To display the OSD in the
future, press the new hotkey.
Autoskip
With the Autoskip feature set, the arrow keys will only access the active computer lines on
the OSD. When Autoskip is Off, the arrow keys will access both active and inactive
computer lines.
To change the Autoskip setting:
1. Navigate to the Autoskip line.
2. Toggle between the options using the Space bar.
Serial port
The Serial port is used for the Firmware upgrade. Serial port On means the program can be
used.
To change the Serial port setting:
1. Navigate to the Serial port line.
2. Toggle between the options using the Space bar.
Changing the Keyboard language
The keyboard is preset to US English. It can be changed to French (FR) or German (DE) by
doing the following:
1. Navigate to the Keyboard language line.
2. Toggle between the options using the Space bar.
Editing the Switch name
You can name a switch using a character string up to 18 characters long. A space constitutes
a character. When there is more than one switch in the system, give each switch's OSD a
different name.
Press F7 to return the OSD to the factory default settings. Note: All changes that have been
made will be removed.
200512060 93-2520 B072 series OM.qxd 3/6/2006 11:17 AM Page 11