Tripp Lite NETCOMMANDERTM B072-016-1 - Manual (Page 10)

10
Operation
(continued)
General Settings
With the highlight line on the word GENERAL, press [Enter]. The General Settings window
appears (see Figure 11).
Figure 11 The General Settings window
From this screen you can do the following:
Security
The OSD offers an advanced password security system made up of three different security
levels. Each security level has its own access rights.
These levels are as follows:
Administrator (Status A)
The Administrator can:
• Set and modify all Passwords and security profiles
• Get full access to any computer
• Use all OSD functions
Supervisor (Status S)
The Supervisor can:
• Get full access to any computer
• Access the following OSD functions:
- F4 Scan, F5 Tune and F6 Moving the Confirmation label
User (Status U)
You can set up six different Users in the KVM system. Each User has its own Profile set by
the Administrator, which defines the access level to different computers. There are three
different access levels.
Activating Password Protection
The factory default setting for the OSD access is to have it not password protected. Only the
Administrator can password-protect the OSD or disable it.
To password protect the OSD:
1. Go to the Security line in the General Settings window.
2. Toggle between Security On and Off using the space bar.
3. Type the Administrator's password (default is "admin") into the Password Box and
Press [Enter].
4. The new security status is set.
200512060 93-2520 B072 series OM.qxd 3/6/2006 11:17 AM Page 10