TP-Link TL-R402M - Manual (Page 34)

TL-R402M Cable/DSL Router User Guide
Figure 5-24 MAC Address Filtering
Before setting up MAC Filtering entries, you must ensure that Enable Firewall and
Enable
MAC Filtering have been selected on the Firewall page. To Add a MAC Address
filtering entry, click the Add New… button. The page " Add or Modify a MAC Address
Filtering entry
" will appear, shown in figure 5-25:
Figure 5-25 Add or Modify a MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC address into the MAC Address field. The format of the
MAC address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0E-AE-B0-00-0B.
2. Type the description of the PC in the Description field. Fox example: John’s PC.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click
the
Save
button to save this entry.
To add additional entries, repeat steps 1-4.
When finished, click the Return button to return to the MAC Address Filtering page.
To Modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click
Modify or Delete as desired on the Edit column.
Click the Enable All button to enable all entries.
Click the Disable All button to disable all entries.
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and click the Previous button to return to the
- 30 -