TP-Link TL-R402M - Manual (Page 24)

TL-R402M Cable/DSL Router User Guide
1. Enter the MAC address (The format for the MAC address is XX-XX-XX-XX-XX-XX.)
and IP address in dotted-decimal notation of the computer you wish to add.
2. Click the Save button when finished.
To modify A Reserved IP address:
1. Select the reserved address entry as you desire, and modify it. If you wish to delete
the entry, make all of the entry fields blank.
2. Click the Save button.
To delete all Reserved IP addresses:
1. Click
the Clear All button.
2. Click the Save button.
Click the Next button to go to the next page and Click the Previous button to return the
previous page.
Note : The function won't take effect until the router reboots.
5.6 Forwarding
Figure 5-13 the Forwarding menu
There are four submenus under the Forwarding menu (shown in figure 5-13): Virtual
Servers
, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are
provided below.
5.6.1 Virtual Servers
Virtual servers can be used for setting up public services on your LAN, such as DNS,
Email and FTP. A virtual server is defined as a service port, and all requests from
Internet to this service port will be redirected to the computer specified by the server IP.
Any PC that was used for a virtual server must have a static or reserved IP address
because its IP address may change when using the DHCP function. You can set up
virtual servers on this page, shown in figure 5-14:
- 20 -