4 remote control transmitter identification – Toshiba MP8640 User Manual

Page 10

Downloaded from Projector.com

™

Multimedia Projector MP8640

2.4 Remote Control Transmitter Identification

STICK SWITCH

If Menu is on screen, stick switch
controls movement within menu.
If Menu is not displayed, stick switch
is used for mouse emulation, i.e. left
mouse button and cursor movement.

RESET / RIGHT button

If Menu is on screen, button resets
menu to factory default settings.
If Menu is not displayed, button is used
for mouse emulation, i.e. right mouse
button.

MENU ON / OFF button

Displays or removes the on-screen
menus.

FOCUS button

Adjusts focus.

VOLUME button

Adjusts volume.

MUTE button

Disables sound.

STANDBY / ON button

Power ON/OFF button.
OFF sets the unit in standby mode.

ZOOM button

Adjusts picture size.

TIMER ON / OFF button

Displays or removes TIMER.
When the blank screen is displayed,
TIMER can not be displayed.

BLANK ON / OFF button

Blanks the screen. Pull down or left on
stick switch to reveal screen.

POSITION button

Hold this button and move stick switch
to adjust vertical and horizontal image
position.

INPUT SELECT buttons

Selects the input source.

1. Remove the battery

compartment cover.

Slide the battery compartment
cover in the direction of the
arrow while pressing slightly
down on it.

2. Insert the batteries as

illustrated inside the
battery compartment.

3. Replace the cover.

How to insert batteries:

Insert the provided batteries (AA or R6P) into the remote control transmitter.