Toshiba DKT2004-CT - Manual (Page 55)

Features
Automatic Busy Redial (ABR)
Strata DKT2004-CT Cordless Digital Telephone 9/00
43
➤
To send an Alert Signal
➤
Press $OHUW 6LJQDO . An alert tone sounds at the designated station.
Note The signal sounds even if the alerted telephone is busy (on or off hook) or in
the DND mode.
Automatic Busy Redial (ABR)
After reaching a busy outside number, you can activate Automatic Busy Redial (ABR)
so that the Strata DK system automatically redials that number for you at regular
intervals. ABR is an optional feature enabled in system programming. This feature
may not be allowed on some (or all) lines in your system depending on the telephone
line type connected.
➤
To activate ABR
1. Press $XWR %XV\
5HGLDO
The Auto Busy Redial LED flashes.
...or press &QI7UQ +
.
You hear confirmation tone after you press &QI
7UQ + .
2. Press 6SNU . The system redials the number every 30 or 60
seconds (depending on system programming), up
to 15 times. With each attempt, the:
●
Line and Spkr LEDs blink when the line is
seized.
●
Dial tone is heard over your speaker.
●
Telephone number is redialed. If busy, ABR
resets and tries again.