Co line access codes – Toshiba DKT2004-CT User Manual
Page 106
Appendix
CO Line Access Codes
94
Strata DKT2004-CT Cordless Digital Telephone 9/00
CO Line Access Codes
CO lines are used when you dial an outside number. If your telephone does not have a
&2
or
/LQH
button, you can enter the appropriate code listed in
to access an
outside line.
You can also store the code on a
6'
button for one-touch access. If you are storing a
CO line access code onto a Speed Dial code, enter
before the CO access code (e.g.,
to store code
, enter
).
In some systems,
is used as a general group code or to access Least Cost Routing
(LCR). System users are required to dial
in order to access an outside line. If you
press
in a system programmed with LCR, you may not hear internal dial tone,
depending on system programming.
See your System Administrator for the code which applies to your telephone.
➤
To access a line
➤
Press [PDN] + CO Line Access Code.
Notes
♦
a
access line groups 1~16, respectively.
♦
a
access individual lines 1~200, respectively.
Table 1
CO Line Access Codes
System
CO Line Access Codes
DK14
a or a
DK16e
a or a
DK40
a or a
DK424 (RCTUA)
a or a
DK424 (RCTUBA/BB)
a or a
DK424 (RCTUC/D)
a or a
DK424 (RCTUE/F)
a or a