Topcom Butler 4812 USB VOIP - Manual (Page 9)

Topcom Butler 4812 USB VoIP 9
Topcom Butler 4812 USB VoIP
ENGLIS
H
10. Symbol display ( ):
– this symbol is the battery indicator.
11. Symbol display ( ):
– this symbol means you are in the menu.
12. Symbol display ( ):
– this symbol appears when you browse the numbers in the Phone Book.
13. Symbol display ( ):
– this symbol appears when you have received a voice mail message (See “6
Voice mail indicator” on page 27).
14. Symbol display ( ):
– this symbol means that the handsfree function is activated. You can now talk
without having to pick up the handset.
– Blinks when base telephone is active. You can’t take the line with the handset as
long as base telephone is active!
15. Symbol display (PC):
– Blinks during incoming PC call
– Steady during PC calls
4 Handset operation
4.1 Setting the language
The telephone has 14 display languages: see display languages table on packaging!!
To set the language, do the following:
•
Press the Programming key .
• Press the Up or Down key repeatedly until ‘SETTING’ appears on the display
• Press the Programming key .
• Press the Up or Down key repeatedly until ‘LANGUAGE’ appears on the display.
• Press the Programming key .
• The language set appears on the display.
• Press the Up or Down key repeatedly to select the language you would like to use.
• Once the desired language appears on the display, press the Programming key to
confirm your selection or repeatedly press the ESC key to leave the menu.
This section only describes PSTN operation and discards any co-related pc
call operations! For PC operation, See ”7 USB PC interface operation”.