Topcom Butler 4812 USB VOIP - Manual (Page 25)

Topcom Butler 4812 USB VoIP 25
Topcom Butler 4812 USB VoIP
ENGLIS
H
replace the oldest calls in the memory. The symbol on the display blinks if the call is not
read or not answered. If the Call List is empty and you press the Up key , three beep tones
will sound.
You can view the information of an incoming call as follows:
•
Press the Up key , select ‘CLIP’ and press OK
• Press the Up key . The name (if sent by the network or present in the Phone Book
memory) of the caller, the sequence number of the call in the Call List, the date and time
of the call appear on the display.
• Press the Down key . The telephone number of the caller appears on the display.
5.1 Setting the date and time
When you receive an incoming call and the date and time are not sent together with the
telephone number or PC TIME (see “PC TIME Settings” on page 29) is not On, this means
that the date and the time will not be shown on the display. By setting the date and time, they
will be shown on the display, together with the telephone number, every time a call comes in !
• Press the Programming key .
• Press the Up or Down key a few times until ‘SETTING’ appears on the display.
• Press the Programming key .
• ’DATE/TIME’ appears on the display.
• Press the Programming key again.
• When ‘YEAR’ appears on the display, enter the 2 last numbers of the year (00=2000,
01=2001, ...) and press the Programming key to confirm.
• When ‘MONTH’ appears on the display, enter the month (01=January, 02=February, ...)
and press the Programming key to confirm.
• When ‘DAY’ appears on the display, enter the day of the month and press the
Programming key to confirm.
• When ‘HOUR’ appears on the display, enter the current hour (in 24h format) and press
the Programming key
to confirm.
• When ‘MINUTES’ appears on the display, enter the minutes and press the Programming
key
to confirm.
The date and time are now set !
5.2 The Call List
The calls received are stored in the Call List (max. 30 numbers).
•
Briefly press the Up key to view the most recent call.
• Select ‘CLIP’ and press OK
• The name of the most recent caller appears on the display. If no name is available, ‘NO
NAME’ appears on the display.
• If it is a private number, ‘UNAVAL’ appears on the display.
• The date and time the call was received are linked to each call.
• Briefly press the Down key to view the telephone number of the call.
• Briefly press the Down key to browse other numbers on the list.