beautypg.com

Topcom Butler 4812 USB VOIP User Manual

Page 13

background image

Topcom Butler 4812 USB VoIP

13

Topcom Butler 4812 USB VoIP

ENGLIS

H

4.8

Call Duration Indicator on the display

As soon as you press the Line key the call duration appears on the display (minutes-
seconds).
E.g. “ 01:20 “ for 1 minute and 20 seconds.
The call duration remains visible on the display for 5 seconds after each call.

4.9

Turning off the microphone (mute)

It is possible to turn off the microphone during a call by pressing the Delete/Mute key . Now
you can speak freely without the caller being able to hear you.

You are on the phone. The Line/Charge indicator

(LED) on the base unit will blink

and the Call symbol appears on the display.

Press the Delete/Mute key

to turn off the microphone.

The symbol ‘X’ appears on the display (

).

When you want to resume the conversation, press the Delete/Mute key

again.

The symbol ‘X’ disappears from the display (

). The person on the other end of the line

can hear you again.

4.10 Pause key

If you dial a telephone number and you would like to add a pause to this number, press the
Pause key at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.

4.11

Conference call (two internal DECT handsets and one external caller)

You can have a telephone conversation with one internal and one external caller at the same
time.

While on the line with an external caller, press the INT key twice.

The external call is now on hold.

‘INT‘ appears on the display.

Dial the number of the handset you would like to include in the call.

Once the handset dialled is answered, keep the ‘#’ key pressed for 3 seconds.

‘CONFERENCE’ appears on the display.

Now you are connected to one external and one internal caller (conference call).

4.12 Locating a misplaced handset (paging)

If you cannot find the handset, briefly press the Paging key on the base unit.
All handsets subscribed with the base unit will sound a signal so you can locate the
misplaced handset. To stop the signal, briefly press the Line key on any handset.

The Speaker volume for normal calls and PC-calls are independent.