Topcom ORBIT - Manual

ORBIT
USER GUIDE
1.1
Before Initial use
Thank you for purchasing this new digital cordless telephone
Intended Purpose:
This product is intend to be connected indoor to a analogue telephone line.
You have acquired a Orbit, which is a product made in accordance with the Digital Enhanced
Cordless Telecommunications (DECT). DECT technology is characterized by high-security
protection against interceptions as well as high-quality digital transmission. This telephone
was designed for a wide range of applications. For example, this telephone can be used
within a network of base units and handsets, constituting a telephone system which:
- Operates up to 5 handsets at one base unit.
- Allows an intercom between 2 handsets.
- Allows the operation of a handset at up to 4 base units.
Caller ID is a network provider service. After subscribing to Caller ID, this phone will display
the caller’s phone number.
Important
To use ‘Caller ID’ (display caller), this service has to be activated on your phone line.
Normally you need a separate subscription from your telephone company to activate this
function. If you don’t have the Caller ID function on your phone line, the incoming telephone
numbers will NOT be shown on the display of your telephone.
The CE symbol indicates that the unit complies with the essential
requirements of the R&TTE directive.
The features described in this manual are published
with reservation to modifications.