TROY Group HP 9050 - Manual (Page 5)

Font Card Installation Guide
Document #50-70409-001 Rev. A
Page 5 of 5
3. Align the top and bottom edges of the formatter board with the top and bottom track guides inside the
printer (Figure 6 and Figure 7), and then carefully slide the formatter board into the printer. Hand-tighten
the two thumbscrews (turn clockwise) to secure the formatter board.
Figure 6 Figure 7
4. Reconnect the printer data cable and power cable. The font card installation is complete.
5. Refer to the TROY Quick-Start Guide (provided with your TROY Font Card Solution) for instructions on
installing the required TROY software and support files.
NOTE: If assistance is required for installing the font card, please call TROY Technical Support
at (800) 332-6427. Customers outside the United States, please call (304) 232-0899.
Align the edge of the formatter board with the
track guides, and push the board into the printer.