Remote slip printer motor lock detector – Toshiba TEC MA-1450-1 SERIES User Manual
Page 69
13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR
EO1-11095
13-1
13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR
13. REMOTE SLIP PRINTER MOTOR LOCK DETECTOR
(1)
This detects the remote slip printer motor lock condition caused by some trouble.
(2)
When such a condition is detected, the front display indicates “Error” and none of the keys (including [RF]
and [JF]) will be accepted.
(3)
To regain the normal condition, turn the powers of the ECR and the remote slip printer to OFF, remove the
cause of the motor lock, and then turn the powers to ON again.
*
If the cause cannot be found in the remote slip printer and only the ECR may be required to work
temporarily without the remote slip printer, remove the remote printer cable from the ECR, and turn the
power of the ECR to ON.