Toshiba TEC MA-1450-1 SERIES - Manual (Page 66)

10. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11095
10-36
In the event of a power failure, it is suggested to check the receipt print content before the receipt is handed to
the customer.
2. The following are the display indications on the power recovery:
10.56 WHEN A POWER FAILURE OCCURS ...
ECR CONDITION at the time of Power Failure DISPLAY INDICATION on the Power Recovery
OUTSIDE A No key-in has been operated. Displays zero. Operations may go on.
SALE Numeric or Declaration keys have Regains the display content that was obtained just
been entered but not motorized keys. before the power failure. The operations may be
continued.
DURING A No Numeric or Declaration keys have Regains the display content that was obtained just
SALE been entered. before the power failure. The operations may be
continued.
Numeric or Declaration keys have
been entered.
10.56 WHEN A POWER FAILURE OCCURS ...
If a power failure occurs, all sales data stored in the memory are automatically protected by the battery installed
in the ECR. The battery is rechargeable and it is recharged when the AC power returns. As the power returns,
the register revives to continue the work and displays the last item entered before the power failure. However,
please note the following phenomena to occur on the register when the power is regained:
1. The printer will work to print the entered data without failure after the power recovery, if any data was being
printed. However, one extra line may be fed on the power recovery depending on the power-recovery timing.
Example:
One extra line is fed here, i.e., a power
failure occurred during printing the
returned item of “VEGETABLE $1,45”.
RTN
VEGETABLE -1,45TF
RTN
Soup Can -0,45TF