Toshiba RD-XS32SU - Manual (Page 44)

44
REC
MENU
Disc budget calculation 9:00 pm 4/3 (Sa)
11 6.6 D/M2 HDD
CH
3 4/10 (Sa) 30 : : –
–
–
–
:
:
: :
:
:
pm 11 50 pm MN
9 6.6 D/M2 DVD 10 4/13 (Tu) 30 pm 10 00 pm MN
10 2.2 D/M1 HDD 42 4/16 (Fr) 30 pm 11 30 pm LP
8 4.6 D/M2 DVD 4 4/16 (Fr) 30 pm 11 30 pm SP
Audio Video Media End Result Date Start
DVD HDD Elapsed Available Selected(current) ( ) DVD HDD
e.g.
Remaining volume
1) Press REC MENU.
The REC MENU appears.
2) Press QUICK MENU.
The Quick Menu appears.
3) Press / to select “Disc budget calculation”
then press ENTER.
The Disc budget calculation menu appears.
4) Press / to select a timer program, then
press ENTER or press ADJUST.
The recorder calculates on a bar graph how much
a specific program (identified by a check mark) will
occupy on the disc.
Pressing the ADJUST button can display or remove
the check mark.
5) Correct the parameters of the timer program if
necessary.
(Skip to step 7 if you do not need this.)
You can change “Media”, “Video” and “Audio”.
Select an item you want to modify and press the
ENTER button. The item will be ready to be altered.
Press the ADJUST button to modify. When
complete, press the ENTER button.
You can adjust to a lower mode (SP to LP) and/or
lower the rate to reduce the quality of the recording,
and thus provide more disc capacity (space).
6) Press .
Program modification is registered.
7) Press REC MENU to exit the GUI.
Selected program Available disc space
When the entry item is marked X, the
recording does not fit. Change the setting.
Elapsed programing (using past data for
programing)
1) Press REC MENU.
The REC MENU appears.
2) Press QUICK MENU.
The Quick Menu appears.
3) Press / to select “Elapsed programing”,
then press ENTER.
The “Elapsed programing” list appears.
4) Press / to select a program, then press
ENTER.
5) Press / to select an item to correct, then
press ADJUST to change the value.
6) When complete, press ENTER.
7) Press REC MENU to exit.
Note
• Up to 36 past programs are saved. Additinn of a new one
deletes the oldest one.
Elapsed programing (using past data for
programing)
1) On the REC MENU, press QUICK MENU.
2) Press / to select “Elapsed programing”,
then press ENTER.
The “Elapsed programing” list appears.
3) Press / to select a program to delete.
4) Press QUICK MENU, then / to select
“Elapsed programing delete”, and press
ENTER.
The selected data is deleted.
If you want to delete all data at once, select “All
elapsed programing delete”.
Programming a recording (REC MENU) (Continued)
Recording