Toshiba RD-XS32SU - Manual (Page 169)

169
Recor
ding
Pla
ybac
k
Other
s
Intr
oduction
Editing
Function setup
Librar
y
Error codes on the display window
The recorder display shows error codes in addition to the message screen.
Main examples are as follows.
The “**” in the “ERR - **” message indicates an error code. To delete this display, press the DISPLAY
button on the remote control.
Note
• If you find an error code other than listed above, consult your nearest TOSHIBA dealer.
Error code Description
ERR-01 Error detected in the physical format.
ERR-10 Exceeded volume detected.
ERR-11 Exceeded number of titles detected.
ERR-12 Exceeded number of chapters detected.
ERR-13 Copy protection information detected.
ERR-14 DVD disc access error detected.
ERR-15 Other errors detected.
ERR-16 HDD access error detected.
ERR-17 Wide image recorded at 1.4 Mbps detected.
ERR-18 Different aspects detected in the same part.
ERR-19 Different resolutions detected in the same part.
ERR-1A Different sound quality modes detected in the same
part.
ERR-1B Invalid control information detected.
ERR-1C Parts created in other recorder.
ERR-1D Parts created with “DVD compatible mode = Off”
detected.
ERR-1E Invalid parts detected.
ERR-1F Unexpected error detected.
ERR-2E Menu encode error detected.
ERR-2F Overflow of the menu size detected.
ERR-30 Exceeded maximum number of menus detected.
ERR-31 Recovery writing executed from compatibiliy of drive
and disc.
ERR-32 Incompatibility of disc format detected.
ERR-33 Disc protected.
ERR-34 Disc protected or system control data error detected.
ERR-35 Exceeded volume in disc budget calculation detected.
ERR-36 Recording failed. (Title not saved.)
ERR-31 Recording failed. (Title saved.)
ERR-38 Writing failed. (Title not reserved)
ERR-39 Writing failed. (Title saved.)
ERR-3A Unexpected error detected.
ER-7000 Possible error detected in the HDD.
• When creating a DVD-Video
• When creating a DVD-Video
• When recording on DVD-R/RW
• When dubbing to DVD-R/RW
• When recording on DVD-R/RW
Others